Exhibitors included in TechTrek

Exhibitors included in TechTrek

  • Tech Trek Entry: 2G Robotics

    In April 2017, the SeaShot Imager Stills Camera & SeaShot LED were launched and released. The SeaShot Imager Stills Camera is an ultra-sensative stills camera which allows the production of crisp images at up to 12fps on fast moving vehicles. The SeaShot LED panel is an illumination package designed specifially for AUV integration.

    Tech Trek Entry: ABB

    The ABB Air Gap Inspector improves motor inspection without removing rotor. A miniature robot fitted with five cameras is being used to crawl in the air gap between the stator and rotor of large motors or generators to visually inspect their status. This, in turn, reduces downtime, inspection costs and the need to withdraw the rotor.

    Tech Trek Entry: Amphibious Energy

    The newly designed offshore energy container (EC) is powered by a specialised offshore wind turbine. Wind energy is converted to electrical power and is stored in several battery packs within the container. Each EC, deployed offshore, supplies a minimum of 3.500 kWh.

  • Tech Trek Entry: Amplemann

    Ampelmann is the Global Leader in Walk to Work solutions by operating motion compensated offshore access systems and services all over the world. The Ampelmann systems are unique and enable safe, efficient and reliable transfers of personnel and cargo.

    Tech Trek Entry: GMS

    Gulf Marine Services (GMS) has developed the world's first well workover cantilever system on a self-propelled self-elevating support vessel (SESV).  This innovative system, designed in partnership with Dwellop A.S, will allow GMS to provide a greater range of services from our vessels and to carry out work that would otherwise have been performed by more expensive non-propelled drilling rigs. 

    Tech Trek Entry: Green Pin

    Van Beest as a shackle manufacturer decided not to focus on creating less costly products, but rather to develop a new shackle from scratch that unlocks much larger savings in its application (wire rope used in a sling can cost 10 times more than a shackle). At the same time, the new shackle should provide extra features that help the rigger to do his/her job safely and efficiently.

  • Tech Trek Entry: Heico

    Heico have entered with three different products including the HEICO-TEC®, HEICO-LOCK® Combi Washers and HEICO-LOCK® HLK Washers. The HEICO-TEC® tension nut is unique in the fact that the pretension force of the large main thread is distributed to many smaller pressure bolts. The HEICO-LOCK® HLK Washers deliver high quality anti vibration bolt security for construction HV sets according to DIN EN 14399-4 and DIN EN 14399-8. The HEICO-LOCK® Combi-Washers are an efficient combined bolt securing system for highly loaded bolted connections and enable quick and easy assembly, especially in difficult installation situations.

    Tech Trek Entry: IFS

    IFS has entered their IoT Business Connector which helps bring your operational data together. It analyzes it and then provides relevant business insights that you can act on. It gives you greater insight into all aspects of your operations and transforms your enterprise into a ‘connected business’ which, in turn, enables you to grow incrementally.

  • ITI on stand 1E72 is attending SPE Offshore for the first time to promote the CADfix PPS solution for the simplification of large and complex MCAD equipment assembly models. The CADfix PPS automatic simplification Wizard and interactive tools enable plant designers to quickly simplify 3D models and reduce file size by up to 70% ahead of integration with plant design modelling systems. CADfix PPS enables plant designers to save time, improve system stability, and ultimately get to commissioning faster. ITI is offering a free CADfix PPS evaluation at SPE Offshore on stand 1E72.
    Tech Trek Entry: Kardex

    Kardex has two entries in Tech Trek including the NEW LR35 and a new generation of storage systems. The intralogistics supplier is adding the Vertical Buffer Module product family to its portfolio, starting with the Kardex Remstar LR 35 storage unit which delivers extraordinarily high performance when picking small parts. The NEW LR 35 is an all-in-one solution containing automated, concentrated, and efficient storage logistics, delivering all the performance required without the need for a major plant engineering project.

  • Tech Trek Entry: Precision Oil Tools

    Precision Oil Tools have entered The IPV which is designed to be installed and run as an integrated part of the completion string or liner. This increases the efficiency of the installation process. It doesn’t require any offshore personnel and can be set up to the Operators specifications onshore or opening setting can easily be adjusted offshore if operations change prior to RIH.

    Tech Trek Entry: Quartzdyne

    Quartzdyne has recently launched a full suite of 200 C rated Quartz memory tools for the oil and gas market.  For 30+ years Quartzdyne has manufactured the world's standard Quartz based pressure sensor.  Now customers can experience the same performance and quality in a memory gauge.  In addition to Quartz tools, Quartzdyne is also offering downhole Piezo memory gauges that perform on par with existing competitive offerings.  

    Tech Trek Entry:Ralston

    DCAP Pressure Calibration Pump for use in testing pressure gauges, transmitters, switches and transducers in the field.  A robust product with all metal construction, designed for use in offshore hazardous locations where durability, reliability and precision are important. 

  • Tech Trek Entry: RUD

    A innovative Lifting device to be operatetd by Remotely Operated vehicles (ROVs) has been developed the last two years in Joint cooperation with leading subsea construction company Subsea 7. It solves all issues found in traditional ROV hooks eliminitating the risk of loosing loads (shedding) and unintentional snagging, thus increasing reliability,  safety and Speed of use

    Tech Trek Entry: Tetra

    Tetra have entered their new innovation, the TETRA CS Neptune®. This is a high-density solids-free, completion fluid and TETRA's new zinc- and formate-free completion fluid is the clear solution to the industry’s quest for an environmentally friendly, cost-effective alternative to traditional zinc bromides and cesium formate high-density completion fluids.

    Tech Trek Entry:Trelleborg

    The Isolast® J9554 perfluroelastomer (FFKM) from Trelleborg Sealing Solutions was released in May 2017. It is a high hardness, high modulus sealing material for mechanically demanding oil & gas applications where sustained high temperature resistance and maximum chemical resistance are required.

  • Tech Trek Entry: TSG

    The TSG/Pipe Repair with SPS is a permanent, class-approved pipework repair solution used where structural integrity, containment, or protection against corrosion is needed. This no hot works bolted design is a cost-effective alternative to pipework replacement, undertaken whilst the pipework is in-service.

    Tech Trek Entry: Watlow

    The WATCONNECT control systems for electric thermal loads are no certified for hazardous and non-hazardous locations. The C2 is the small non-hazardous panel, the C3 is the small hazardous panel, the C4 is the medium non-hazardous panel and the C5 is the medium hazardous panel. These systems offer standard features found only on custom engineered panels.

    Tech Trek Entry: De Pretto

    EASY LOCK subsea swivel connector outstanding features of metal-to-metal sealing:
    • Reduced installation, tie-in and test time thanks to free relative rotation between the flanges
    • Withstands API_6AF2 combination loads during deployment and operation
    • Low activation energy given EASY LOCK preloaded metal-to-metal sealing
    • Failsafe in case of hydraulic unit failure
    • 30 years service time
    • Multiple open/close cycles

    EASY LOCK is used during installation of pipelines and jumpers in subsea oil and gas fields.
    The EASY LOCK swivel is API_6A, 17D certified and can be customized to specific project requirements up to 15,000 psi working pressure and installation depths to 3,500 m.

  • Tech Trek Entry: EC-OG

    The Subsea Power Hub is a ground-breaking turbine system which harnesses the energy within ocean currents to produce autonomous electrical power for multiple applications. This new technology, patented by EC-OG, provides autonomous power to subsea infrastructure, reducing cost through efficient installation and removing the capital expenditure associated with electrical cables.

    Tech Trek Entry: Nord-Lock Group

    Superbolt HyFit™, an advanced hydraulic expansion bolt, is designed to deliver high performance torque transmission for critical load rotating shafts and couplings. It’s a direct retrofit replacement or alternative to a conventional coupling bolt, providing significant benefits through both operational improvements in coupling performance and time saving during plant maintenance periods.

    Tech Trek Entry: Oil States Industry (UK) Ltd

    Following a response to industry requirements in riser technology, Oil States Industries (UK) Ltd has newly developed a riser system that can meet the technically challenging requirements and stringent acceptance criteria imposed by deep water developments, whilst maintaining an uncompromising strategy of quick and efficient riser assembly in riser tasks such as Early Production, Completion, Workover and Intervention.

  • Tech Trek Entry: Peterson

    eHire, the latest addition to Peterson’s leading integrated eLogistics suite, is a simple solution for end-to-end management of the asset hiring process, providing visibility and transparency of asset location and status.  eHire provides real time asset on/off hire status with faster response times, more accurate reporting of hires, unit location, visibility of hire cost from a centralised location and accurate asset certification status reporting.

    Tech Trek Entry: Savante Subsea Ltd

    Savante's mini CTS-3D underwater laser scanner, being launched at the Oil and Gas Technology centre innovation pavillion on the 7th September, is the worlds first integrated inspection tool that places 3D laser measurement in the hands of divers. The mini CTS-3D combines 3D subsea laser measurement technology with an internal video camera and uses a standard divers umbilical for communications and telemetry.

    Tech Trek Entry: Schlumberger

    Schlumberger Introduces Complete Cased Hole Formation Evaluation and Reservoir Monitoring from a Single Tool. Pulsar service delivers rigless formation evaluation and monitoring for any reservoir to improve drilling efficiency and well productivity. In June 2017 Schlumberger introduced the Pulsar* multifunction spectroscopy service.  The new service provides the industry’s first complete cased hole formation evaluation and reservoir saturation monitoring with openhole logging quality.

  • Tech Trek Entry: Schneider Electric

    Introducing EasyPact EXE MV, the new innovative vacuum circuit breaker from Schneider Electric. Simple to use, the EasyPact EXE circuit breaker has a robust design and manufacturing controls.  Proven compliance with IEC 62271-100 standard. 

    Tech Trek Entry: Swagelok Scotland

    This ECITB approved course provides awareness and understanding of EI small bore tubing guidelines and associated best practices in relation to instrument hook ups, close coupling, vibration mitigation and identification, and avoidance of static and dynamic loads which will affect SBT systems over time.  It provides a better understanding of the challenges faced by the installers of SBT systems and is focused on increased safety, hydrocarbon containment, competence/upskilling, compliance, cost savings and efficiencies.

    Tech Trek Entry: Woodgroup
    Wood Group has developed Proevx, an analytics-enabled, web-based software platform for production efficiency and loss reporting. It is transforming awareness of the causes and consequences of production deferrals and facilitates efficiency tracking, action tracking and regulatory reporting.

    Collaborative working technology like 'eXpert' helps to connect the workforce with the knowledge, insights and expertise it needs, when it most needs it. This is achieved using a specialist software application for video, audio and data streaming, supported by intrinsically safe mobile hardware where required mobile, Wi-Fi or satellite communications, optimized for the available bandwidth. This technology enables the efficient execution of operations, inspection, maintenance, and integrity services and enhances communication with remote and hazardous worksites.
  • Veridian is a powerful web-based screening tool used to identify and assess vibration risks in process piping systems, regardless of the scale or size of an asset. It can integrate with many integrity management programmes and identifies and mitigates potential risks to piping systems design.

    Derived from the Energy Institute Guidelines for the Avoidance of Vibration Induced Fatigue Failure in Process Pipework, Veridian assesses risks by calculating the likelihood of failure for each mainline and small-bore connection and risk levels are shown for each piping line, represented using a simple dashboard. Veridian was created by engineers directly involved in the development of these guidelines and the team continues to provide ongoing updates.

    Tech Trek Entry: Webtool

    Webtool have entered three new products to Tech Trek including The Cable Retrieval Tool (CRT200), EHP350, and the SLP80. The CRT200 is designed to grip and lift subsea umbilical and cable for offshore oil & gas and decommissioning projects. The EHP350 is the industry’s first electro-hydraulic power pack bringing a high pressure, hydraulic capability to inspection class and smaller ROVs. Last but not least, the SLP80 which is the Webtool portable softline emergency deck cutter which is designed for tugs, barges and offshore vessels. Easily deployed and operated remotely, the cutter provides an instant cut of fibre ropes up to 80mm diameter in the event the vessel gets into difficulties.

    Tech Trek Entry: Welltec

    The Welltec® Puncher is a new wireline conveyed service for making holes mechanically in casings and tubings. The hole is made by a controlled drill bit which is available in different diameters to cover a wide range of casing/tubing sizes and weights, whilst at the same time avoiding damage to casings behind the tubing being drilled. Multiple holes can be drilled in one run and the Welltec Puncher is through wired so it can be combined with other intervention or logging tools.


We use cookies to operate this website and to improve its usability. Full details of what cookies are, why we use them and how you can manage them can be found by reading our Privacy & Cookies page. Please note that by using this site you are consenting to the use of cookies.